FDOT (4-way, vectors)

8-bit floating-point dot product to single-precision

This instruction computes the fused sum-of-products of a group of four 8-bit floating-point values held in each 32-bit element of the first source and second source vectors. The single-precision sum-of-products are scaled by 2-UInt(FPMR.LSCALE), before being destructively added without intermediate rounding to the corresponding single-precision elements of the destination vector.

The 8-bit floating-point encoding format for the elements of the first source vector and the second source vector is selected by FPMR.F8S1 and FPMR.F8S2 respectively.

This instruction is unpredicated.

Encoding: SVE2

Variants: (FEAT_SVE2 && FEAT_FP8DOT4) || FEAT_SSVE_FP8DOT4 ((FEAT_SVE2 && FEAT_FP8DOT4) || FEAT_SSVE_FP8DOT4)

31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
0	1	1	0	0	1	0	0	0	1	1						1	0	0	0	0	1
									op		Zm										o2	Zn					Zda

FDOT <Zda>.S, <Zn>.B, <Zm>.B

Decoding algorithm

if !HaveSVE2FP8DOT4() then EndOfDecode(Decode_UNDEF);
constant integer n = UInt(Zn);
constant integer m = UInt(Zm);
constant integer da = UInt(Zda);

Operation

CheckFPMREnabled();
if IsFeatureImplemented(FEAT_SSVE_FP8DOT4) && IsFeatureImplemented(FEAT_FP8DOT4) then
    CheckSVEEnabled();
elsif IsFeatureImplemented(FEAT_FP8DOT4) then
    CheckNonStreamingSVEEnabled();
else
    CheckStreamingSVEEnabled();
constant integer VL = CurrentVL;
constant integer elements = VL DIV 32;
constant bits(VL) operand1 = Z[n, VL];
constant bits(VL) operand2 = Z[m, VL];
constant bits(VL) operand3 = Z[da, VL];
bits(VL) result;

for e = 0 to elements-1
    constant bits(32) op1 = Elem[operand1, e, 32];
    constant bits(32) op2 = Elem[operand2, e, 32];
    bits(32) sum  = Elem[operand3, e, 32];

    sum = FP8DotAddFP(sum, op1, op2, FPCR, FPMR);
    Elem[result, e, 32] = sum;

Z[da, VL] = result;

Explanations

<Zda>: Is the name of the third source and destination scalable vector register, encoded in the "Zda" field.
<Zn>: Is the name of the first source scalable vector register, encoded in the "Zn" field.
<Zm>: Is the name of the second source scalable vector register, encoded in the "Zm" field.

Operational Notes

This instruction might be immediately preceded in program order by a MOVPRFX instruction. The MOVPRFX must conform to all of the following requirements, otherwise the behavior of the MOVPRFX and this instruction is CONSTRAINED UNPREDICTABLE:

• The MOVPRFX must be unpredicated.
• The MOVPRFX must specify the same destination register as this instruction.
• The destination register must not refer to architectural register state referenced by any other source operand register of this instruction.