STTNP (SIMD&FP)

Store unprivileged pair of SIMD&FP registers, with non-temporal hint

This instruction stores a pair of SIMD&FP registers to memory, issuing a hint to the memory system that the access is non-temporal. The address used for the store is calculated from an address from a base register value and an immediate offset. For information about non-temporal pair instructions, see Load/Store SIMD and Floating-point non-temporal pair.

Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.

Explicit Memory effects produced by the instruction behave as if the instruction was executed at EL0 if the Effective value of PSTATE.UAO is 0 and either:

  • The instruction is executed at EL1.
  • The instruction is executed at EL2 when the Effective value of HCR_EL2.{E2H, TGE} is {1, 1}.

    • Otherwise, the Explicit Memory effects operate with the restrictions determined by the Exception level at which the instruction is executed.

    Encoding: Signed offset

    Variants: FEAT_FP && FEAT_LSUI (FEAT_FP && FEAT_LSUI)

    313029282726252423222120191817161514131211109876543210
    1110110000
    opcVRLimm7Rt2RnRt

    STTNP <Qt1>, <Qt2>, [<Xn|SP>{, #<imm>}]

    Decoding algorithm

    if !IsFeatureImplemented(FEAT_FP) || !IsFeatureImplemented(FEAT_LSUI) then
    EndOfDecode(Decode_UNDEF);
constant integer t = UInt(Rt);
constant integer t2 = UInt(Rt2);
constant integer n = UInt(Rn);
constant boolean nontemporal = TRUE;
constant integer datasize = 128;
constant bits(64) offset = LSL(SignExtend(imm7, 64), 4);
constant boolean tagchecked = n != 31;

    Operation

    CheckFPEnabled64();
bits(64) address;
bits(64) address2;
constant integer dbytes = datasize DIV 8;

constant boolean privileged = AArch64.IsUnprivAccessPriv();
constant AccessDescriptor accdesc = CreateAccDescASIMD(MemOp_STORE, nontemporal,
                                                       tagchecked, privileged);

if n == 31 then
    CheckSPAlignment();
    address = SP[64];
else
    address = X[n, 64];

address = AddressAdd(address, offset, accdesc);

address2 = AddressIncrement(address, dbytes, accdesc);
Mem[address , dbytes, accdesc] = V[t , datasize];
Mem[address2, dbytes, accdesc] = V[t2, datasize];

    Explanations

    <Qt1>: Is the 128-bit name of the first SIMD&FP register to be transferred, encoded in the "Rt" field.
    <Qt2>: Is the 128-bit name of the second SIMD&FP register to be transferred, encoded in the "Rt2" field.
    <Xn|SP>: Is the 64-bit name of the general-purpose base register or stack pointer, encoded in the "Rn" field.
    <imm>: Is the optional signed immediate byte offset, a multiple of 16 in the range -1024 to 1008, defaulting to 0 and encoded in the "imm7" field as <imm>/16.

    Operational Notes

    If PSTATE.DIT is 1, the timing of this instruction is insensitive to the value of the data being loaded or stored.